Cisco Systems CISCO CATALYST 2960-CX 8 PORT POE LAN BASE. : WS-C2960CX-8PC-L (Enterprise Computing > Switches & Hubs). Images for illustration purposes only. The Cisco Catalyst Compact Switches easily extend your Cisco Catalyst switching infrastructure outside the wiring closet to enable new workspaces, extend wireless LANs, and connect Power over Ethernet (PoE) devices.
These fanless, small form-factor switches are ideal for space-constrained deployments where multiple cable runs would be challenging. With increased bandwidth, double the PoE capacity, faster CPU, and more memory, the Cisco Catalyst 3560-CX and 2960-CX bring a multifold improvement in performance to the Cisco Catalyst Compact Switch product line.
They offer many smart and innovative features for management, simplicity, and scale. New features include: - 8 or 12 Gigabit Ethernet ports with line-rate forwarding performance - Gigabit copper Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks - Power over Ethernet Plus (PoE+) support with up to 240W of PoE budget - Advanced Layer 2 (LAN Base) and Layer 3 (IP Base) support with an option to upgrade to IP Services - Perpetual PoE for powering a powered device even when the device is booting - Cisco Catalyst Instant Access (optional with 10G) for management simplicity - Network plug-and-play (PnP) support for automating device configuration - Cisco TrustSec capability for role-based access security - Innovative power management features, including Energy Efficient Ethernet and switch hibernation mode - NetFlow Lite for application visibility at the access network Upgrade Paths Cisco Catalyst 3560-CX and 2960-CX Series Switches build upon the success of the 3560-C and 2960-C compact switches and offer superior performance and scale. They come in the same form factor as the older switches, and you can use them anywhere you used the older switches. Customers migrating to the new compact switches will benefit from the increased scalability and performance, innovative new features, and proven performance.
The data transfer capacity of the switch per second. FCC, CE, CFR 47, EN 55022, EN 55024, AS/NZS, CISPR22:2004, EN55022, VCCI, KCC, ANATEL, CCC, GOST.List of regulatory safety standards for all countries in which this product has been certified. UL 60950-1, CAN/CSA 22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CE, GB 4943, IEC 60825. The type of mounting that can position devices in a shelving system (rack). Using a website/web application to manage something.
Quality of Service (QoS) support. A network switch is a computer networking device that links networking segments. A switch has different layers, such as layer 2 (a network bridge, operating at the data link layer, interconnecting a small number of devices) and layer 4 (can act as a firewall, amongst other things). What switch device has, managed or unmanaged. A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.
A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously. The product can use Oracle 10G, which is a database management system introduced in 2003. The way in which the network is working, e. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g. IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u, IEEE 802.3z.The heat generated by the power supply. The minimum and maximum temperatures at which the product can be safely stored.
The minimum and maximum temperatures at which the product can be safely operated. Mean time between failures (MTBF). Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle.This number (in hours) does not indicate the mean time before failure for a single unit/mechanism. The amount of memory, usually measured in bytes e. MB, GB, which is installed in the system's hardware. Gigabit Ethernet (copper) ports quantity. Basic switching RJ-45 Ethernet ports type. The type/category of basic switching RJ-45 Ethernet ports (sockets). Basic switching RJ-45 Ethernet ports quantity. The number of basic switching RJ-45 Ethernet ports (sockets). Amount of power consumed by this model, often expressed in watts (W).
Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage. 1.5 - 3.25 A. The voltage of the AC electricity that is inpitted into the product. Total Power over Ethernet (PoE) budget. Power over Ethernet plus (PoE+) ports quantity.
The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Network protocols tested as compatible with this product e. ICMP, ARP, BOOTP, OSPF, DHCP.
UDP, TFTP, IP, TCP, FTP. Telnet, RIP, SNMP, NTP, TACACS+, RMON, HTTP, RADIUS. Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. The measurement of the product from head to foot or from base to top.
The distance from the front to the back of something. The measurement or extent of something from side to side.