Available in desktop and rack-mount models, these switches are designed to suit any small business with basic network needs and are optimized for power efficiency. They provide robust network connectivity your business demands, as well as added reliability with advanced features such as Quality of Service (QoS), loop detection, and cable diagnostics, all in a switch that you can set up yourself in minutes.
The Cisco Business 110 Series switches bring the proven reliability and investment protection of Cisco networking solutions to your small business. The data transfer capacity of the switch per second. The MAC address is the'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, FCC Class B. The shape or design of the product. The type of mounting that can position devices in a shelving system (rack). Quality of Service (QoS) support. A network switch is a computer networking device that links networking segments.
A switch has different layers, such as layer 2 (a network bridge, operating at the data link layer, interconnecting a small number of devices) and layer 4 (can act as a firewall, amongst other things). What switch device has, managed or unmanaged.
A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link. The different speed levels of the Ethernet LAN connection.
A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously. The product can use Oracle 10G, which is a database management system introduced in 2003. The way in which the network is working, e. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x. The heat generated by the power supply. The minimum and maximum temperatures at which the product can be safely stored. The minimum and maximum temperatures at which the product can be safely operated.
Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly. Mean time between failures (MTBF). Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.The amount of memory, usually measured in bytes e. MB, GB, which is installed in the system's hardware. The clock rate is the fundamental rate in cycles per second (measured in hertz) at which a computer performs its most basic operations such as adding two numbers. There are more factors, like internal memory size, that influence a computer's actual response time.
Gigabit Ethernet (copper) ports quantity. Basic switching RJ-45 Ethernet ports type. The type/category of basic switching RJ-45 Ethernet ports (sockets).
Basic switching RJ-45 Ethernet ports quantity. The number of basic switching RJ-45 Ethernet ports (sockets). The voltage of the AC electricity that is inpitted into the product. There is a power supply with this product.Total Power over Ethernet (PoE) budget. Power over Ethernet (PoE) ports quantity. The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras. Weight of the product without packaging (net weight).
If possible, the net weight is given including standard accessories and supplies. The measurement of the product from head to foot or from base to top. The distance from the front to the back of something. The measurement or extent of something from side to side.