Brand New Cisco

CISCO CATALYST WS-C2960X-48FPD-L SWITCH 48 PORTS MANAGED Factory Sealed

CISCO CATALYST WS-C2960X-48FPD-L SWITCH 48 PORTS MANAGED Factory Sealed
CISCO CATALYST WS-C2960X-48FPD-L SWITCH 48 PORTS MANAGED Factory Sealed
CISCO CATALYST WS-C2960X-48FPD-L SWITCH 48 PORTS MANAGED Factory Sealed
CISCO CATALYST WS-C2960X-48FPD-L SWITCH 48 PORTS MANAGED Factory Sealed

CISCO CATALYST WS-C2960X-48FPD-L SWITCH 48 PORTS MANAGED Factory Sealed
CISCO CATALYST 2960X-48FPD-L - SWITCH - 48 PORTS - MANAGED - RACK-MOUNTABLE. SMARTNET ELIGIBLE AND CLEAN SERIALS. Cisco Catalyst 2960X-48FPD-L - switch - 48 ports - managed - rack-mountable. Switch - 48 ports - managed - stackable. 48 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+. Switching capacity: 216 Gbps ¦ Forwarding performance (64-byte packet size): 130.9 Mpps. SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI. Layer 2 switching, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion Detection System (IDS), IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, RADIUS support, SSH support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (CoS), Cisco FlexStack Plus.

IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX. AC 120/230 V (50/60 Hz). Max Units In A Stack. Kerberos, Secure Shell (SSH), RADIUS, TACACS+.

Port status, port transmission speed, port duplex mode, system, RPS (Redundant Power Supply), PoE, link/activity. 48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 24 ports (PoE+) / 48 ports (PoE) - 30 W ¦ 1 x console console - RJ-45 - RJ-45 ¦ 1 x mini-USB console - mini-USB Type B - Type B management ¦ 2 x USB Type A ¦ 1 x 1000Base-TX 10Base-T/100Base-TX - RJ-45 - RJ-45 management ¦ 2 x SFP+ - SFP+ uplink. 1 (total) / 1 (free) x Stacking Module slot. Redundant Power System (RPS) connector.

CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2011/65/EU, VCCI Class A, KN24, KN22 Class A, EN 300386.

The item "CISCO CATALYST WS-C2960X-48FPD-L SWITCH 48 PORTS MANAGED Factory Sealed" is in sale since Tuesday, December 22, 2020. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches". The seller is "usa_networks" and is located in Ames, Iowa.

This item can be shipped worldwide.

  • Network Connectivity: Wired-Ethernet (RJ-45)
  • Model: Cisco Catalyst 2960
  • Maximum LAN Data Rate: 1000 Mbps/1 Gbps
  • Number of LAN Ports: 48
  • Interface: Ethernet (RJ-45)
  • Network Management Type: Fully Managed
  • Ethernet Technology: Gigabit Ethernet (1000-Mbit/s)
  • Type: Catalyst Switch
  • MPN: WS-C2960X-48FPD-L
  • Maximum Data Transfer Rate: 1 Gbps
  • Brand: Cisco
  • Form Factor: Rack Mountable


CISCO CATALYST WS-C2960X-48FPD-L SWITCH 48 PORTS MANAGED Factory Sealed