Brand New Cisco

CISCO C897VA-K9 Cisco 897 VDSL2/ADSL2+ over POTs and 1GE/SFP Router

CISCO C897VA-K9 Cisco 897 VDSL2/ADSL2+ over POTs and 1GE/SFP Router
CISCO C897VA-K9 Cisco 897 VDSL2/ADSL2+ over POTs and 1GE/SFP Router

CISCO C897VA-K9 Cisco 897 VDSL2/ADSL2+ over POTs and 1GE/SFP Router

Cisco 897VA - Router - DSL modem - 8-port switch Product Description. Cisco 890 series routers deliver high performance with integrated security and threat defense. Network security has become a fundamental building block of any network, and Cisco routers play an important role in embedding security at the customer's access edge. This solution is scalable and easy to maintain, ideally suited for small businesses and enterprise small branch offices.

Cisco 890 series routers are ideal for service provider deployments as Metro Ethernet customer premises equipment (CPE). Cisco 892 Integrated Services Routers include two onboard WAN interfaces, one Gigabit Ethernet WAN port, and one Fast Ethernet WAN port to support the high-bandwidth demands of Metro Ethernet deployments. The router also provides failover protection and load balancing. The Cisco 890 series provides significant value to customers by simplifying deployment of Ethernet WAN services with end-to-end OAM, SLA monitoring and verification, and configuration management, resulting in increased operational efficiency and reduced operating expenses (OpEx).

Cisco 890 series routers enable customers to deliver high-performance and high-availability, mission-critical business applications. These capabilities include Virtual Router Redundancy Protocol (VRRP) (RFC 2338), Hot Standby Router Protocol (HSRP), Multigroup HSRP (MHSRP), and dial backup with external modem through a virtual auxiliary port. Cisco 890 series routers are integrated with ISDN BRI for a secondary WAN backup connection. If the primary Ethernet-access WAN is disconnected, the router detects this failure and fails over to the secondary backup WAN. The Cisco 890 series is ideal for enterprise small branch offices and small businesses that need to be connected to larger enterprise networks.

These routers help extend corporate networks to secure remote sites while giving users access to the same applications found in a corporate office. They provide increased reliability for diversity of wireless data, voice, and video applications. When users require WLAN access, visibility and control of network security are even more critical at the remote site. The Cisco 890 series meets this need with a single device that combines integrated 802.11 a/g/n capabilities with security features such as Wi-Fi Protected Access (WPA), including authentication with IEEE 802.1X with Cisco Extensible Authentication Protocol (LEAP) and Protected EAP (PEAP), and encryption with WPA Temporal Key Integrity Protocol (TKIP).

Product Description: Cisco 897VA - router - DSL modem - desktop. Device Type: Router - DSL modem - 8-port switch (integrated). Digital Signaling Protocol: ADSL2, ADSL2+, VDSL2. Data Link Protocol: Ethernet, Fast Ethernet, Gigabit Ethernet.

Capacity: IPSec VPN tunnels:50. Network / Transport Protocol: L2TP, RSVP, ICMP/ IP, IPSec, FTP, DHCP, DNS, L2TPv3.

Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, OSPFv3, policy-based routing (PBR), BGP-4+, WCCP, Bidirectional Forwarding Detection (BFD). Remote Management Protocol: Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI. Features: Firewall protection, NAT support, power over Ethernet (PoE), VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, DiffServ support, MAC address filtering, IPv6 support, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), RADIUS support, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD), DHCP relay, DHCP client, Virtual Routing and Forwarding (VRF), Class of Service (CoS).

Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af, IEEE 802.1x, IEEE 802.3ah, IEEE 802.1ag Power AC 120/ 230 V (50/ 60 Hz). Dimensions: (WxDxH) 32.3 cm x 24.8 cm x 4.4 cm. Interfaces LAN: 8 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ WAN: 1 x SFP (mini-GBIC) ¦ WAN: 1 x VDSL / ADSL2+ ¦ Management: 1 x console - RJ-45 ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x 1000Base-T - RJ-45 ¦ WAN: 1 x BRI. Expansion Slots 1 (total) / 1 (free) x memory. Capacity IPSec VPN tunnels: 50. Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af, IEEE 802.1x, IEEE 802.3ah, IEEE 802.1ag, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN 61000-6-1, AES, FCC CFR47 Part 15, Triple DES, DES, VCCI V-3. Device Type Router - 8-port switch (integrated). Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet.

Network / Transport Protocol L2TP, RSVP, ICMP/IP, IPSec, FTP, DHCP, DNS, L2TPv3. Routing Protocol OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, OSPFv3, policy-based routing (PBR), BGP-4+, WCCP, Bidirectional Forwarding Detection (BFD). Remote Management Protocol Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI.

Encryption Algorithm DES, Triple DES, PKI, 128-bit AES, 192-bit AES, 256-bit AES. Features Firewall protection, NAT support, power over Ethernet (PoE), VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DiffServ support, MAC address filtering, IPv6 support, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), RADIUS support, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD), DHCP relay, DHCP client, Virtual Routing and Forwarding (VRF), Class of Service (CoS). RAM 512 MB (installed) / 1 GB (max). Flash Memory 256 MB (installed) / 256 MB (max).

Status Indicators Port status, power, PoE. Voltage Required AC 120/230 V (50/60 Hz). Power Device External power adapter - 60 Watt.

Framing Format ANSI T1.413. Digital Signaling Protocol ADSL2, ADSL2+, VDSL2. Protocols & Specifications ITU G. DMT Annex A, ITU G. 992.3 Annex A, ITU G. OS Provided Cisco IOS Advanced IP services. Min Operating Temperature 0 °C. Max Operating Temperature 40 °C. Humidity Range Operating 10 - 85% (non-condensing).

The item "CISCO C897VA-K9 Cisco 897 VDSL2/ADSL2+ over POTs and 1GE/SFP Router" is in sale since Wednesday, September 19, 2018. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Enterprise Routers". The seller is "shumaila2015" and is located in Bradford, West Yorkshire. This item can be shipped to United Kingdom, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Brazil, New Zealand, China, Israel, Norway, Mexico, Singapore, South Korea, Switzerland, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, South africa, Chile, Bahamas, Colombia, Uruguay, Viet nam, Philippines.

  • Brand: Cisco
  • MPN: C897VA-K9


CISCO C897VA-K9 Cisco 897 VDSL2/ADSL2+ over POTs and 1GE/SFP Router