Cisco AIR-AP3802I-E-K9=

All these units are new sealed boxed, but the serials have already been covered with SmartNET. Cisco Aironet 3802I Access Point. Suitable for indoor environments with internal antennas.

802.11ac Wave 2 support. CISCO AIRONET 3802I ACCESS POINT. The Cisco® Aironet® 3800 Series Wi-Fi access points are highly versatile and deliver the most functionality of any access points in the industry.

For organisations paving the way for the new 802.11ac Wave 2 standard, the Cisco Aironet 3800 Series is the perfect solution. The access points go beyond getting ready for the new standard, providing the ultimate in flexibility and versatility. For large enterprise organisations that rely on Wi-Fi to engage with customers, the 3800 Series is a hands-off product thats intelligent enough to make decisions based on end-device activities and usage. This automation allows you to devote time to other pressing matters, secure in the knowledge that your Wi-Fi network is performing to its utmost potential.

802.11ac Wave 2 support - Provides a theoretical connection rate of up to 2.6Gbps per radio. High-density experience - Best-in-class RF architecture that provides high-performance coverage for a high density of client devices, giving the end user a seamless wireless experience.

Features include custom hardware in 802.11ac Wave 2 radios, Cisco CleanAir®, Cisco Client Link 4.0, cross-access point noise reduction, and an optimized client roaming experience. Multiuser Multiple Output Multiple Input (MU-MIMO) technology - Supporting three spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximise throughput. Multigigabit Ethernet support - Providing multiple gigabit uplink speeds for 2.5Gbps and 5Gbps in addition to 100-Mbps and 1-Gbps speeds. All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T (IEEE 802.3bz) cabling. Flexible Radio Assignment - Allows the access points to intelligently determine the operating mode of serving radios based on the RF environment.

The access points can operate in the following modes: 1. 2.4-GHz and 5-GHz mode. One radio serves clients in 2.4-GHz mode, while the other serves clients in 5-GHz mode. Both radios inside the access point operate on the 5-GHz band, maximising the benefits of 802.11ac Wave 2 and increasing client device capacity. Wireless Security Monitoring and 6-GHz mode. One radio serves 5-GHz clients while the other is scanning the full spectrum for attackers, RF interference, and rogue devices. Dual 5-GHz radio support - Enables both radios to operate in 5-GHz client serving mode, allowing 5.2Gbps (2x 2.6Gbps) over-the-air speed while increasing client capacity. Modular architecture - New side-mount connection allows companies to add and remove modules as needed without having to dismount the access point from the ceiling. The amount of power available to 3800 Series modules has been doubled form 9W to 18W, broadening the potential module applications and solutions. 160-MHz channel support - Supporting channels up to 160 MHz wide, Dynamic Bandwidth Selection allows the access point to dynamically switch between 20-, 40-, 80-, and 160-MHz channels, depending on the RF channel conditions, providing the industry's best-performing wireless network.

Cisco ClientLink 4.0 - Cisco ClientLink 4.0 technology improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11a/b/g/n/ac while improving battery life on mobile devices such as smartphones and tablets. Cross-access point noise reduction - A Cisco innovation that enables access points to intelligently collaborate in real time about RF conditions so that users connect with optimised signal quality and performance. Optimised access point roaming - Helps ensure that client devices associate with the access point in their coverage range that offers the fastest data rate available.

Automatic link aggregation (LAG) support - 802.3ad (Link Aggregation Control Protocol [LACP]) compliant, allowing both Ethernet interfaces to automatically enable LAG, increasing overall throughput to the access point. Cisco Mobility Express - Flexible deployment mode through the Cisco Mobility Express solution is ideal for high density environments and can support up to 100 access points.

Easy setup allows the 3800 Series access points to be deployed on networks without a physical controller. Apple Features - Apple and Cisco have responded to this challenge by partnering to create an optimal mobile experience for iOS devices on corporate networks based on Cisco® technologies. Specifically, using new features in iOS 10 in combination with the latest software and hardware from Cisco, businesses can now more effectively use their network infrastructure to deliver an enhanced user experience across all business applications. At the center of the collaboration is a unique handshake between Cisco WLAN and Apple devices. This handshake enables Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices. Additionally, Cisco WLAN trusts Apple devices and gives priority treatment for business-critical applications specified by the Apple device. The item "Cisco AIR-AP3802I-E-K9=" is in sale since Monday, July 27, 2020. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Enterprise Router Components\Router Modules/Cards/Adapters". The seller is "voiceanddataresale" and is located in Potters Bar. This item can be shipped to United Kingdom.

MPN: AIR-AP3802I-E-K9=
Brand: Cisco