The model AIR-AP1852I-E-K9 provides E Regulatory Domain and internal antennas. Table 1 shows the quick specs of AIR-AP1852I-E-K9. 802.11ac Wave 2 Access Point, 4x4:4, Internal-Ant, E Regulatory Domain.
4x4 MIMO with four spatial streams, single-user MIMO. 4x4 MIMO with three spatial streams, multiuser MIMO.802.11ac beamforming (transmit beamforming). 20-, 40-, and 80-MHz channels. PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz). Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx). 2.412 to 2.472 GHz; 3 channels.
5.180 to 5.320 GHz; 8 channels. 5.500 to 5.700 GHz; 8 channels. (excludes 5.600 to 5.640 GHz). 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE). 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (used for Link Aggregation). USB 2.0 (enabled via future software). Dimensions (W x L x H).8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm). 3.12 lb (1.41 kg). Figure 1 shows the AIR-AP1852I LED Indicator Position. Table 2 shows the AP LED indicators' descriptions.
Normal operating condition, but no wireless client associated. Normal operating condition, at least one wireless client association. Boot loader signing verification failure. AP priming to a new regulatory domain by Neighbor Discovery Protocol (NDP), in progress.Cycling Red, Green and off. AP waiting to be primed.
AP primed to a wrong regulatory domain. Cycling through green, red, and amber. Rapidly cycling through red, green, amber, and off. Access point location command invoked from controller web interface.
Cycling through red, green, amber, and off. General warning; insufficient inline power. This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Access Points".
The seller is "essential_it" and is located in this country: IE.