Cisco Catalyst C9300-24UXB-A 24x 10G/mGig RJ45 UPoE Network Switch + C9300-NM-8X

NEW Cisco Catalyst C9300-24UXB-A 24x 10G/mGig RJ45 UPoE Network Switch + C9300-NM-8X. UK/EU serial, the serial numbers are clean and not covered onSmartnet. 1 x NEW Cisco Catalyst C9300-24UXB-A 24x 10G/mGig RJ45 UPoE L3 Network Switch With.

1 x Cisco C9300-NM-8X 8x 10GbE SFP+ Port Module. 1 x 1100W Power Supply PWR-C1-1100WAC-P. 3 x Fan Modules FAN-T2. 1 x Cisco 50cm Stack Cable STACK-T1-50CM. 1 x Cisco 30cm Power Stack Cable CAB-SPWR-30CM. 1 x UK Power Cable CAB-TA-UK. 1 x Cisco 240GB USB 3.0 Solid State Drive SSD SSD-240G.

1 x Rackmount Hardware Kit 53-100835-01. Product Description: Catalyst 9300 Deep Buffer 24p mGig, UPOE, Network Advantage.

Stacking Bandwidth Support: 480 Gbps. Catalyst 9800 Embedded WLC: Yes (200 APs). SD-Access Support: Yes (256 Virtual Networks). Total 10/100/1000, Multigigabit copper or SFP Fiber: 24 Multigigabit Cisco UPOE (100M, 1G, 2.5G, 5G, or 10 Gbps).

Default AC power supply: 1100W AC. Total number of MAC addresses: 64,000. Total number of IPv4 routes (ARP plus learned routes): 64,000. IPv6 routing entries: 32,000.

Multicast routing scale: 16,000. QoS scale entries: 18,000. ACL scale entries: 18,000.

32 MB buffer for 24- and 48-port Gigabit Ethernet models. 64 MB buffer for 24-port Multigigabit model (24UXB). 128,000 flow on 24- and 48-port Gigabit Ethernet models. 256,000 flows on 24-port Multigigabit.

Total Switched Virtual Interfaces (SVIs): 1000. Total routed ports per Catalyst 9300 Series stack: 448. Switching capacity with stacking: 1120 Gbps.

Forwarding rate: 476.19 Mpps. Forwarding rate with stacking: 833.33 Mpps.

Dimensions (H x W x D) inches. Chassis only: 1.73 x 17.5 x 17.1. W/ Default Power Supply: 1.73 x 17.5 x 20.2. W/ 1100W Power Supply: 1.73 x 17.5 x 20.2.

Mean Time Between Failures-MTBF (hours): 288,520. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK. CS 309736 - FOC2614YDMH dup.

---