802.11ac Wave 2 Support - The Cisco Aironet 3802E Wireless Access Point supports 802.11ac Wave 2, providing a theoretical connection rate of up to 5.2 Gbps- that's roughly four times the rate offered by today's high-end 802.11ac access points. The boost helps you stay ahead of the performance and bandwidth expectations of today's mobile worker, who usually uses multiple Wi-Fi devices instead of just one. As such, users are adding proportionally larger traffic loads to the wireless LAN, which has outpaced Ethernet as the default enterprise access network.(up to 2.6 Gbps per radio). High-density Experience - Best-in-class RF architecture provides high-performance coverage for a high density of client devices, giving the end user a seamless wireless experience. Features include custom hardware in 802.11ac Wave 2 radios, Cisco CleanAir, Cisco ClientLink 4.0, cross-access point noise reduction, and an optimized client roaming experience. MU-MIMO Technology - Supporting three spatial streams, MU-MIMO (Multiuser multiple-input multiple-output) enables access points to split spatial streams between client devices, to maximize throughput. Multigigabit Ethernet Support - With multigigabit Ethernet support, the wireless access point provides multiple gigabit uplink speeds of 2.5 Gbps and 5 Gbps in addition to 100 Mbps and 1 Gbps speeds. All speeds are supported on Category 5e cabling for an industry first, as well as 10G BASE-T (IEEE 802.3bz) cabling.
Flexible Radio Assignment - This feature allows the access points to intelligently determine the operating mode of serving radios based on the RF environment. The access points can operate in the following modes. 2.4 GHz and 5 GHz mode: One radio serves clients in 2.4 GHz mode, while the other serves clients in 5 GHz mode. Dual 5 GHz mode: Both radios inside the access point operate on the 5 GHz band, maximizing the benefits of 802.11ac Wave 2 and increasing client device capacity. Wireless Security Monitoring and 5 GHz mode: One radio serves 5 GHz clients while the other is scanning the full spectrum for attackers, RF interference, and rogue devices.160 MHz Channel Support - Supporting channels up to 160 MHz wide, Dynamic Bandwidth Selection allows the access point to dynamically switch between 20, 40, 80, and 160 MHz channels, depending on the RF channel conditions, providing the industry's best-performing wireless network. Zero-impact Application Visibility and Control - Use dedicated hardware acceleration to improve the performance of line-speed applications such as Cisco Application Visibility and Control. Cisco ClientLink 4.0 - Cisco ClientLink 4.0 technology improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11a/b/g/n/ac while improving battery life on mobile devices such as smartphones and tablets. Cisco CleanAir 160 MHz - Cisco CleanAir technology, enhanced with 160 MHz channel support, provides proactive, high-speed spectrum intelligence across 20, 40, 80, and 160 MHz wide channels to combat performance problems due to wireless interference. Cross-access Point Noise Reduction - A Cisco innovation that enables access points to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance.
Optimized Access Point Roaming - This helps ensure that client devices associate with the access point in their coverage range that offers the fastest data rate available. Automatic Link Aggregation (LAG) Support - 802.3ad (Link Aggregation Control Protocol [LACP]) compliance allows both Ethernet interfaces to automatically enable LAG, increasing overall throughput to the access point. Cisco Mobility Express - Flexible deployment mode through the Cisco Mobility Express solution is ideal for high density environments and can support up to 100 access points. Easy setup allows the wireless access point to be deployed on networks without a physical controller. Apple Features - Apple and Cisco have responded to this challenge by partnering to create an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies.Specifically, using new features in iOS 10 in combination with the latest software and hardware from Cisco, businesses can now more effectively use their network infrastructure to deliver an enhanced user experience across all business applications. At the center of the collaboration is a unique handshake between Cisco WLAN and Apple devices. This handshake enables Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices. Additionally, Cisco WLAN trusts Apple devices and gives priority treatment for business-critical applications specified by the Apple device. Standards: IEEE 802.11b, IEEE 802.11a, IEEE 802.3ad (LACP), IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac. Wireless Data Rates: Up to 5.2Gbps. Frequency Band: 2.4 GHz / 5 GHz. 1 x 1/2.5/5GBase-T - RJ-45. 1 x 1000Base-T (auxiliary) - RJ-45. 1 x 1000Base-T (management) - RJ-45. If you are unhappy with one of our products, you can send it back as long as you follow these basic rules. After the first 30 days. We cannot guarantee when your order will arrive. In no event shall Prime Electronic Components, Inc. Or any of its affiliates be liable for any indirect, special, incidental or consequential damages including but not limited to loss of use, loss of data, loss of business or profits. Some localities do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Determining compatibility with your equipment is your responsibility.
Prime Electronic Components can not possibly guarantee compatibility with all devices. Item is new and in its original packaging.
Item was originally bulk packaged and we repackaged them for individual sale. Item was originally made for use by an OEM as a part of a system. Even though it may have the same partnumber as a standard part; this item may be configured specifically for the OEM that originally order it. Item is new and has been removed from its original packaging. Item was originally installed in a new system that was scrapped or recycled before it was put into service.
We have removed it and repackaged it for individual sale. Item was removed from a used system, cleaned, tested, and re-packaged for individual sale.
Item was removed from a used system and refurbished to make it fully functional. We have repackaged it and tested it to guarantee functionality. We have tested, cleaned and re-packaged it for sale. If you have any issues please contact them directly for repair or replacement information. For 1 year if the item stops functioning we will repair or replace it with a comparable unit.For 30 Days if the item stops functioning we will repair or replace it with a comparable unit. For 90 Days if the item stops functioning we will repair or replace it with a comparable unit. The item "BRAND NEW CISCO Aironet 3802E 802.11ac Wireless Access Point AIR-AP3802E-B-K9" is in sale since Friday, July 10, 2020. This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Access Points". The seller is "prime_electronic_components" and is located in Deer Park, New York. This item can be shipped worldwide.